Go Back to:
Home > Mailing & Paper Handling Equipment Catalog > Address, Envelope, Postcard Printers >


Rena Envelope Imager XT 4.0 Tabletop Address Printer

legacy model

Rena Envelope Imager XT 4.0,address printers,envelope printers,usps postal barcode printers,postcard printers,address printer,envelope printer,postcard printer

The RENA Systems Envelope Imager XT 4.0 has horsepower. It has all the features of the XT 3.0 with a larger 4” print area. Split over four separate print modules for unprecedented coverage and extreme flexibility. Eight HP 45A-Style high capacity cartridges and TrueType fonts provides options for adding attention lines, postal barcodes, return addresses and indicia at the same time. The Envelope Imager XT 4.0 is fast and tireless, producing superior results at production speeds of over 34,000 postcards or 26,000 #10 envelopes/hr.

Supporting this output is the AccuTrak Transport – a wide center belt with a powerful vacuum assist that keeps pieces in place through transport. Outer transport belts can be customized to the size of the mail piece.

The XT 4.0 accepts materials up to 3/8” thick and runs in-line with RENA Systems T-750 and T-950 tabbers. Cartridge capping stations are standard. Storing inkjet cartridges increases their yield by keeping them fresh in a special station.

Key Features


Technical Specifications

PRINT TECHNOLOGY

Thermal Inkjet, Eight HP 45A-Style High Capacity Cartridges

ADDRESS SPEED 34,000 /hour at 150 dpi
25,000 /hour at 200 dpi
20,000 /hour at 300 dpi
11,000 /hour at 600 dpi
(9 lines on 4" x 6" Postcard)
26,000 /hour at 150 dpi
19,000 /hour at 200 dpi
15,000 /hour at 300 dpi
7,200 /hour at 600 dpi
(9 lines on #10 Envelopes)
PRINT QUALITY
(Dots Per Inch)

Description

Dots Per Inch Resolution
High Quality 600 dpi 600 x 600 dpi
Letter Quality 300 dpi 600 x 300 dpi
Standard Quality 200 dpi 600 x 200 dpi
Draft Quality 150 dpi 600 x 150 dpi
IMAGE AREA

4” X 17” w/ 13” vertical range

PRINT HEAD SPLIT

3 Pen Stitched + 2 Pen Stitched + 2 Pen Stitched + 1 Pen Design

PROCESSOR

AMD TigerSharc 100 MHz DSP with Dual Calculation Technology

PRINT ORIENTATION

Normal and Reverse

FONTS

All TrueType fonts available on PC

INK MONITOR

Visible on Display

GRAPHICS, LOGOS, AND BARCODES

Allows printing of graphics, logos, and barcodes

MATERIAL SIZE Length – 5” to 17”  Width – 3” to 13.5"
MATERIAL THICKNESS

Up to 3/8”

FEEDER In-line design works with various input devices
FEEDER INTERFACE

Start-Stop Control

TRANSPORT TYPE Five Channel AccuTrak Vacuum Transport with Repositionable Outer Belts/Side Guides
VACUUM TYPE

Through-the-Belt Triple Pancake Fans with On/Off Control

SOFTWARE

Windows Printer Drivers for Windows 98, 2000, NT, ME, and XP

PC INTERFACE

Centronics Parallel and USB 2.0

DIAGNOSTICS Resident in firmware
FIRMWARE UPDATE Flash PROM update
DUTY CYCLE 120 million addresses total or 2,000,000 per month over a 5-year life cycle.
DIMENSIONS

11.5” H x 30” L x 23” W (292 mm H x 762 mm L x 584 mm W)

WEIGHT

90 lbs. (40.9 kg)

ELECTRICAL

115VAC or 240VAC 50/60 Hz

OPTIONS EASYFeed Feeders, T-750/T-950 In-line Tabbers, XPS-ProFeed Feeders,
Conveyor/Stacker/Dryer, Right-2-Left Configuration
COUNTERS One operator resettable job counter, one permanent lifetime counter
MEMORY 64MB

Additional Information

Rena Envelope Imager XT 4.0 Brochure