Go Back to:

Kao Collins TWK-2138 Quick Disconnect Cartridge


Your Price: $92.00

Product Options

* denotes required field

Choose Type of Cartridge*
The Collins Ink TWK-2138 OD Black Ink allows users to print at a lower dpi, while still producing a dark image. This enables the customer to print at high speeds, without compromising the quality of the image.

Specifications

Ink name TWK-2138
Ink part number TWK-2138
Target Substrates matte, gloss, corrugated
Fluid Base   water
Colorant type   dye
Drop volume   TBD
Drop speed   TBD
Throughput volume before cartridge failure <40 ml
Shelf life single use cartridge   1 year from date of fill
Shelf life modified cartridge   6 months from date of fill
Runs in bulk supply station   yes
Decap time   <30 sec
Optical density   1.17 @ 600 x 300 dpi on bond
Operating Conditions   10 to 40˚C
Storage Temperature   10 to 30˚C
Additional Shipping Requirements   none

Recommended Printer Settings

Pen driver voltage: 10.2 V

The Collins Ink CM-150 High Speed Ink allows users to print at a lower dpi, while still producing a dark image. This enables the customer to print at high speeds, without compromising the quality of the image.

Fire pulse length: 2.2 microseconds

Fire pulse warming temperature (on or off): Off

Rec pulse warming variable: 40˚C

Dryer assistance needed: Stock Dependent

Type: N/A


Cartridge Maintenance & Handling

• When cleaning the printhead, use a lint-free cloth moistened with de-ionized water.

• Wipe slowly and lightly across tip of the long edge with the printhead facing down.

• Forcing the wipe or using a dry cloth with scratch the printhead

• Using a cloth with lint may clog the nozzles

Cartridge Storage

• Less than 1 day down: Leave cartridges in machine and wipe and purge before next use.

• More than 1 day down: Remove cartridges from machine and place a cartridge clip over the head. Wipe and purge before use.

• Storing cartridges in an airtight container with a damp cloth or sponge, will prevent them from drying out.

• Using a cloth with lint may clog the nozzles