The fully automated DC-648 Slitter/Cutter/Creaser is the latest introduction to Duplo's line of all-in-one finishing solutions. With capabilities to slit, cut, crease, and perforate in one pass, the DC-648 produces full-bleed applications up to 40 sheets per minute.
Eliminate touchpoints and increase efficiency. Finish digital print jobs in faster turnarounds. Ideal for short to mid-production runs, the DC-648 produces a variety of applications such as 24-up business cards, postcards, coupons and tickets, book covers, and much more. Bring precision finishing in-house!
Features
Key Applications
Technical Specifications
Speed Up to 40 sheets per minute (8.5” x 11” 2 cuts, 1 crease and camera setting off)
Input Paper Size 8.26” x 8.26” to 14.56” x 39.37” (210 mm x 210 mm to 370 mm x 1,000 mm) Maximum length with standard feed and exit tray is 27.95"
Min. Finished Size 1.89” x 1.97” (48 mm x 50 mm)
Tolerance
+/-0.2 mm. When running sheets heavier than 350 gsm, the tolerance for slitting and creasing is +/-0.3 mm (+/- 0.4 mm for business cards)
**The tolerance of creasing may be affected by the number of creases and/or their depths
**With documents longer than 26", the tolerance for slitting is +/- 0.6 mm and for cutting/creasing +/- 1.4 mm
Feeder Capacity 4.72” (120 mm)
Paper Weight 110 - 400 gsm
Slits Up to 8 per sheet (6 standard slitter tools with 2 margin slitters and 4 center slitters, Optional slitter module with a set of 2 slitters can be added)
Cuts Up to 30 per sheet
Creases Up to 20 per sheet (interchangeable 1.2 mm and 1.4 mm widths)
Memory 250 jobs using the control panel
Standard Features
Air knife, card stacker, fan registration, automatic gutter slit deflectors, crease depth adjustment, ultrasonic
double feed detection sensor, feed skew adjustment, batch separation, waste box, emergency stop switch,
on-the-fly rejection, camera sensor, PC Controller software, PC pole mount, LCD control panel
Options
PC and PC Arm, 48" long conveyor stacker, and elevating card stacker
RTM-09 Rotary Tool Module includes 2 each of perforation, micro-perforation, scoring, and slit-scoring tools.
Up to 3 RTM-09s can be installed in the unit at one time, replacing slitter modules
CPM-09 Cross Perforation Module includes 1 each of perforation, micro-perforation, and slit-scoring tools
The OPK-03 PCB kit must be installed when using any of the optional modules but only one kit is needed to use multiple modules
Power Requirements 115V: 5.5A, 60Hz
Dimensions (WxDxH) 95” x 35” x 44” (2,430 mm x 885 mm x 1,120 mm)
Net Weight 758 lb (344 kg)
Additional Information
