Go Back to:
Home >
Mailing & Paper Handling Equipment Catalog >
Paper Cutters and Trimmers >
Features
1. Accurate Cutting - The backgauge enables you to adjust the cutting length accurately by 0.5mm / 0.019".
2. Cutting line - The LED cutting line shows the actual cutting position. It allows the safe and smooth
operation.
3. Safety - The PC-450 is activated only when the two cutting buttons are simultaneously pressed. The
machine does not operate when the front cover is opened. Also, if either of two cutting buttons is released
during the cutting operation, the machine stops immediately. There is also the cover on the back of the
table for maximum safety.
Easy Operation
Clamp the stock by turning the pressure handle by hand, and
press two cutting buttons.
Cutting Length Adjustment
The backgauge can be adjusted by 0.5 mm / 0.019" by turning the
handle at the front table. The backgauge can be locked when you
repeat the same cutting job.
Operator Safety
Double Safety Circuit
If the error occurs, the machine detects the trouble part.
Also, the relay with forcibly guided contacts are provided to
secure the safety.
Safety Mechanism
The machine does not operate when the front cover is opened.
Also, if either of two cutting buttons is released during the cutting
operation, the machine will be stopped immediately.
Key Switch
The Power switch can be key-activated to limit user access.
Clamp
The special cutouts are provided on both edges of clamp to prevent
the book spine from crushing.
Counter
Cut cycles are indicated on a digital counter. It helps to determine
when the cutting knife should be replaced.
Technical Specifications
Cutting Width Max. 446 mm / 17.5”
Cutting Height Max. 70 mm / 2.75”
Cutting Depth Max. 450 mm / 17.7”;
Min. 20 mm / 0.79”
Clamp System and
Pressure Manual,
Max. About 10 kN (1,000 kgf)
Cutting Speed 3.3 seconds per cycle (50 Hz);
2.8 seconds per cycle (60 Hz)
Voltage/Frequency
Single Phase 100 V, 50 / 60 Hz
Single Phase 115 V, 50 / 60 Hz
Single Phase 230 V, 50 / 60 Hz
Rated Current Single Phase 115 V, 50 / 60 Hz, 13 A;
Single Phase 230 V, 50 / 60 Hz, 13 A
Machine
Dimensions
W830 x D890 x H1,300 mm / W32.7" x D35.1" x H51.2"(Including
the parts projected such as handle)
W800 x D810 x H1,190 mm / W31.5" x D31.9" x H46.9"(excluding
the parts projected such as handle)
Machine Weight 216 kg / 475.8 lb (Without transformer)
Additional Information
