Go Back to:
Home > Mailing & Paper Handling Equipment Catalog > Paper Cutters and Trimmers >

Standard PC-640 Paper Cutter

Standard PC-640 Paper Cutter

1. Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019".
2. Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
3. Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety.

Easy Operation
Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons. The backgauge can be adjusted by 0.5 mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.

Operator Safety
Double Safety Circuit
The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
Safety Mechanism
The machine does not operate when the front cover is opened. Also, if either of the two cutting buttons is released during the cutting operation, the machine will be stopped immediately.
Key Switch
The Power switch is key-activated to limit user access.

Cut cycles are indicated on a digital counter. It helps to determine when the cutting knife should be sharpened or replaced.

Special cutouts are provided on both edges of the clamp to prevent the book spine from crushing.

Technical Specifications

Cutting Width Max. 640mm / 25.19”
Cutting Height Max. 70mm / 2.75”
Cutting DepthMax. 640mm / 25.19”; Max. 20mm / 0.79”
Clamp System and Pressure Manual, Max. About 10 kN (1,000 kgf)
Cutting Speed 3.3 seconds per cycle (50 Hz); 2.8 seconds per cycle (60 Hz)
Single Phase 115 V, 50 / 60 Hz
Single Phase 230 V, 50 / 60 Hz
Rated Current Single Phase 115 V, 50 / 60 Hz, 15 A; Single Phase 230 V, 50 / 60 Hz, 15 A
Machine Dimensions W1,070 x D1,185 x H1,315 mm / W42.2" x D46.7" x H51.8"
Machine Weight 318 kg / 700.5 lb

Additional Information

Standard PC-640 Brochure